When you receive delivery of a voiceover from Voice To Me, you need to master the recording (unless otherwise specified when ordering). This is the final step before you release it into the world. This is where you fine-tune the audio to make it sound as good as possible. Here are some important things to keep in mind:
1. Levels and dynamics
- Volume: Make sure all audio has an even volume level. Peaks that are too high can clip, while levels that are too low make it difficult to hear.
- Dynamic compression: This tool can be used to reduce the difference between the highest and lowest audio levels, resulting in a more even sound.
- Limiting: To avoid distortion, you can use a limiter to cap the maximum audio level.
2. EQ (Equalizer)
- Frequency balance: Use an equalizer to adjust different frequencies. Boost the frequencies that make the voice clear and articulate, and reduce those that sound undesirable.
- Room reverb: If there is too much room reverb, you can use an equalizer to reduce it. (If you purchased your voice recording from us at Voice To Me, you do not need to worry about this step. All our voices have undergone our thorough quality assurance. Neither room reverb nor background noise is included in a production from us.)
3. Stereo width
- Mono compatibility: Even if you produce in stereo, it is important to ensure that your voiceover also sounds good when played back in mono.
- Panning: Use panning to create an illusion of space, but do not overdo it.
4. Noise Reduction
- Background noise: If there is background noise, such as fans or traffic, you can use a noise reduction plug-in to reduce it. (You do not need to think about this if you purchased your voice from us at Voice To Me, as all our voices and studios are quality-assured.)
5. Normalisation
- Even volume: Normalise the audio file to ensure it has a consistent volume level.
6. Format and bit depth
- Format selection: Choose a suitable format for your distribution, e.g. WAV or MP3.
- Bit depth: Higher bit depth provides better audio quality, but the files also become larger.
7. Reference audio
- Comparison: Use a reference track of known quality to compare your work and ensure it meets the standard.
8. Listen in different environments
- Different speakers: Listen to your voiceover on different speakers and headphones to get a sense of how it sounds in different listening environments.
9. Take a break
- Fresh ears: After working on a project for an extended period, it can be difficult to hear mistakes. Take a break and come back to it with fresh ears.
Recommended software:
- Audacity: A free and popular program for audio editing.
- Adobe Audition: A professional tool with many advanced features.
- iZotope RX: Specialised in fixing audio issues such as noise, clicks and pops.
Tips:
- Start with a good recording: A good recording is the foundation of good mastering.
- Trust your ears: The most important tool you have is your ears.
- Be careful with automation: Too much automation can make the audio flat and dull.
- Ask for feedback: Have others listen to your voiceover and provide feedback.
If you feel even the slightest uncertainty when it comes to mastering and processing your voice recording or your entire audio production, you are welcome to hand everything over to our producers here at Voice To Me. We have extensive experience in mastering and mixing for TV, radio and web. We usually deliver within 24 hours and, of course, provide a full quality guarantee.
You are welcome to send your enquiry or place an order for mastering and audio production here